_Chris_
06-10-2006, 08:47 PM
First, I removed the existing granite blacksplash so the tile blacksplash could run down to the countertop
http://i19.photobucket.com/albums/b161/cncsales/DSC02419.jpg
Then I protected my surfaces with Painters tape and a piece of a cardboard box
I Covered all Holes from outlets (all wiring was run to power strip under cabinet)
http://i19.photobucket.com/albums/b161/cncsales/DSC02420.jpg
Layed out the design in the garage.
Granite pieces are Baltic Brown 4" squares, I also used strips of 1/2" tumbled stone, 4" tumbled stone, the filler pieces around the granite are 6" tumbled stone cut into 4 pieces.
http://i19.photobucket.com/albums/b161/cncsales/DSC02423.jpg
With Type 1 premixed Tile/Stone adheisve,I began to lay out the first row
http://i19.photobucket.com/albums/b161/cncsales/DSC02425.jpg
and so on
http://i19.photobucket.com/albums/b161/cncsales/DSC02426.jpg
http://i19.photobucket.com/albums/b161/cncsales/DSC02419.jpg
Then I protected my surfaces with Painters tape and a piece of a cardboard box
I Covered all Holes from outlets (all wiring was run to power strip under cabinet)
http://i19.photobucket.com/albums/b161/cncsales/DSC02420.jpg
Layed out the design in the garage.
Granite pieces are Baltic Brown 4" squares, I also used strips of 1/2" tumbled stone, 4" tumbled stone, the filler pieces around the granite are 6" tumbled stone cut into 4 pieces.
http://i19.photobucket.com/albums/b161/cncsales/DSC02423.jpg
With Type 1 premixed Tile/Stone adheisve,I began to lay out the first row
http://i19.photobucket.com/albums/b161/cncsales/DSC02425.jpg
and so on
http://i19.photobucket.com/albums/b161/cncsales/DSC02426.jpg