Stainless steel pipes?

Qacer · 10-05-2009, 06:58 PM

I'd like to get an idea of how much a stainless steel pipe would cost per foot. I'm thinking a pipe with an outer diameter of 2 inches and an inner diameter of 1.8 inches.

Thanks1

williamb82 · 10-06-2009, 06:33 PM

onlinemetals.com

Water Filtration · 10-13-2009, 09:25 AM

hello,

you will get all the information about the pipes, its sizes and prices on the following site

http://www.onlinemetals.com/merchant.cfm?id=58&step=2

http://www.matthewdavis.com.au/matthew_price_list.php

BIGBOI · 10-14-2009, 04:34 PM

What are you using it for?

Also, how much do you need?

Also, onlinemetals.com is expensive.

TNathe · 10-14-2009, 04:43 PM

ebay...or exhaust shop local to you

**Jeff240sx** · 10-14-2009, 05:19 PM

That's a hell of a pipe... an exhaust shop wouldn't have anything like that, Tyler.

.1" walls... no way.

What do you want this pipe for, and why so damned thick?

TNathe · 10-14-2009, 05:39 PM

good call...yeah, wtf are you using it for?

Qacer · 10-21-2009, 11:06 PM

It was just a project that I had in mind. I wanted to roast a whole pig. Anyway, I'm now looking for steel sheet metal locally. I'm looking for something like 4 ft x 5 ft. I've searched online, but it seemed expensive especially with shipping. I figured I can find it locally. Home Depot only seems to have swatches of it.

TNathe · 10-22-2009, 09:18 AM

go to a metal supply, HomeDepot is NOT a metal supply company. Apparently you have welding/cutting skills? If not how you gonna build this thing? BTW, if you find an old LARGE propane tank (like they use on houses) you can make a grill out of it, even mount it on a trailer.

Qacer · 10-22-2009, 07:57 PM

I don't have welding skills, but I already have a basic pit. I just need a sheet metal so I can separate the ashes from the burning coals. I plan on drilling holes on the sheet metal. I checked out non-galvanized steel chicken wires, but they are expensive. Apparently, using galvanized steel chicken wire is not good if you heat up because the fumes give you flu-like symptoms.

**Jeff240sx** · 10-23-2009, 10:22 AM

Don't use galvanized anything... zinc melts at 400*C and boils at 900*C. You probably won't hit the latter number, but the former is very low.

TNathe · 10-23-2009, 10:27 AM

pretty slick, and yeah, galvanizing is POISONOUS when burned off.
anywho http://www.tampasteel.com/ or there are a few other in the tampa area.

**Jonnoh** · 10-27-2009, 12:04 PM

Tyler

TNathe · 10-27-2009, 12:05 PM

what? lol. wtf?

10-05-2009, 06:58 PM	#1 (permalink)
Qacer Registered User	Stainless steel pipes? I'd like to get an idea of how much a stainless steel pipe would cost per foot. I'm thinking a pipe with an outer diameter of 2 inches and an inner diameter of 1.8 inches. Thanks1

10-06-2009, 06:33 PM	#2 (permalink)
williamb82 Registered User	onlinemetals.com

10-13-2009, 09:25 AM	#3 (permalink)
Water Filtration Registered User	hello, you will get all the information about the pipes, its sizes and prices on the following site http://www.onlinemetals.com/merchant.cfm?id=58&step=2 http://www.matthewdavis.com.au/matthew_price_list.php

10-14-2009, 04:34 PM	#4 (permalink)
BIGBOI Registered User	What are you using it for? Also, how much do you need? Also, onlinemetals.com is expensive.

10-14-2009, 04:43 PM	#5 (permalink)
TNathe Registered User	ebay...or exhaust shop local to you

10-14-2009, 05:19 PM	#6 (permalink)
Jeff240sx KDM. Yea, I said it.	That's a hell of a pipe... an exhaust shop wouldn't have anything like that, Tyler. .1" walls... no way. What do you want this pipe for, and why so damned thick?

10-14-2009, 05:39 PM	#7 (permalink)
TNathe Registered User	good call...yeah, wtf are you using it for?

10-21-2009, 11:06 PM	#8 (permalink)
Qacer Registered User	It was just a project that I had in mind. I wanted to roast a whole pig. Anyway, I'm now looking for steel sheet metal locally. I'm looking for something like 4 ft x 5 ft. I've searched online, but it seemed expensive especially with shipping. I figured I can find it locally. Home Depot only seems to have swatches of it.

10-22-2009, 09:18 AM	#9 (permalink)
TNathe Registered User	go to a metal supply, HomeDepot is NOT a metal supply company. Apparently you have welding/cutting skills? If not how you gonna build this thing? BTW, if you find an old LARGE propane tank (like they use on houses) you can make a grill out of it, even mount it on a trailer.

10-23-2009, 10:22 AM	#11 (permalink)
Jeff240sx KDM. Yea, I said it.	Don't use galvanized anything... zinc melts at 400C and boils at 900C. You probably won't hit the latter number, but the former is very low.

10-23-2009, 10:27 AM	#12 (permalink)
TNathe Registered User	pretty slick, and yeah, galvanizing is POISONOUS when burned off. anywho http://www.tampasteel.com/ or there are a few other in the tampa area.

10-27-2009, 12:04 PM	#13 (permalink)
Jonnoh step back, deep breath	Tyler

10-27-2009, 12:05 PM	#14 (permalink)
TNathe Registered User	what? lol. wtf?